Multi-cavity energy-saving aluminum-plastic composite insulation profile

Doors and Windows system

Hahuaqiang brand series of multi-cavity energy-saving aluminum-plastic composite thermal insulation profiles, doors and Windows Overview 1, can produce 60,65,70 series of multi-cavity energy-saving aluminum-plastic composite thermal insulation profiles, and 90 degrees angle, 135 degrees angle and other supporting materials; 2, can make 60,65,70 series flat window, flat open hanging window, flat open door, open door, special-shaped doors and windows; 3, the open fan adopts three sealing structures of pressing type to separate the air-tight cavity and water-tight cavity. 4, by changing different glass pressing strips, it can make three glass, double glass doors and windows; 5. The door and window sashes are divided into two types of profiles: one is a special profile for the flat open hanging door and window sashes, which adopts standardized design and can be installed with imported European Standard and domestic hardware parts, thus enhancing the versatility of the hardware; the other is a special profile for the flat open door and window sashes, can Be installed with the well-known manufacturers of Hahuaqiang licensing multi-cavity energy-saving aluminum-plastic composite thermal insulation profile supporting the strengthening of hardware, the open fan profile design structure is unique superior to similar products, and durable. Second, Superior Product Performance 1, significant energy-saving, heat insulation, cooling effect, Ha Huaqiang multi-cavity energy-saving aluminum-plastic composite thermal insulation profile design unique structure, the Middle Section adopts multi-cavity and large area cold-break structure (5 large cavity and 2 small cavity) , in which plastic material is 3 cavity, and a third seal is added between the opening fan and frame, which has reduced and hindered the exchange of hot and cold air inside and outside. After sealing the outside of doors and windows with square tape and then sealing them with glass glue, the air tightness and water tightness are improved, and the effect of heat insulation and sound insulation, energy saving and cold cutting are enhanced, three glass doors and windows thermal insulation performance index less than 2.0 w/m2k. Ha Huaqiang brand aluminum plastic doors and windows, energy-saving insulation, heat insulation and cooling effect. 2, Super Wind pressure resistance performance, Ha Huaqiang licensing multi-cavity energy-saving aluminum-plastic composite thermal insulation profile design structure is reasonable and unique, profile using multi-chamber big angle code, the aluminum-plastic-aluminum composite profiles processed by advanced hydraulic compound production equipment after the aluminum alloy profiles on both sides of the room and the middle plastic profiles are accurately clamped and connected with each other, combined with the precise dimensions of doors and windows, the use of two-in-one Punch Riveting Group Angle, set angle clamping positioning area, increase the angle strength, so it has a strong wind pressure performance. 3. Good air tightness, water tightness and sound insulation effect. The structure of the door and window of the multi-cavity energy-saving aluminum-plastic-aluminum composite heat insulation profile of Ha Huaqiang brand is reasonable. The pressure pressure of the sealing tape can reach 3.5 ~ 4.0 mm; the square tape is used on the outside of glass, and a layer of glass glue is made on the groove of the square glue bar to further improve the tightness and sealing of the glass installation. The opening fan is designed with three-seal structure, which can effectively prevent the intrusion of sand, dust, rain and noise, and enhance the air-tightness, water-tightness and sound-insulation effect. The doors and windows have been tested by the National Building Materials Testing Center, with air tightness level 5, water tightness level 5(600PA) and sound insulation level 4(39dB) . The highest level of air tightness and water tightness is level 5. 4, exceptional weather resistance and anti-aging, Ha Huaqiang multi-cavity energy-saving aluminum-plastic composite thermal insulation profile doors and windows, doors and windows on both sides of the aluminum alloy profiles are treated by surface coating, weather resistance is strong, the intermediate plastic profiles are made of imported LG-PVC raw materials and are contained by both indoor and outdoor aluminum alloy profiles, avoiding the direct contact between the plastic profiles and the outside world and suffering from ultraviolet radiation and corrosion by acid rain, therefore, the defects of easy aging, easy fading, easy deformation and poor weather resistance of plastic steel profiles are fundamentally solved. With exceptional weather resistance and anti-aging. 5, advanced surface treatment, Hahuaqiang brand aluminum-plastic composite thermal insulation profile surface through electrostatic spraying, electrophoretic coating, wood grain thermal penetration transfer printing, fluorocarbon treatment, to produce a variety of colors of aluminum-plastic profile, decorative effect is good, give a person with elegant and luxurious feeling. Product scope, high-rise residential buildings, luxury hotels, commercial buildings, high-grade residential, villas, institutions, schools, office buildings, office buildings, residential.